The Art of the Performance Bagger: Built to Order. Available Now.

The Art of the Performance Bagger: Built to Order. Available Now.

The first-ever Harley-Davidson CVO Road Glide ST was introduced for the 2024 model year and marked a new "performance bagger" direction for the CVO line-up, heavily inspired by Harley's "King of the Baggers"; racing efforts. In 2025 Harley-Davidson shocked the world again with the release of the CVO Road Glide RR.

This strictly limited production model was intended as a road going replica of the Championship winning King Of The Baggers race bike and moved the dial in perception of what a performance bagger could be, offering genuine Superbike level performance but with all the comforts of a Grand Touring motorcycle. Since then the CVO ST has grown in stature and makes the perfect donor for the ultimate V-twin performance and touring motorcycle using specially selected parts.

Contact us at service@warrs.com for more information

We can offer this model in Road Glide or Street Glide as delivered from the factory or equipped with our performance pack with the following upgrades:

Screamin’ Eagle Factory Race Team suspension

These high-performance rear shocks for Touring models were designed with Öhlins specifically for Screamin Eagle® Factory Team race bikes. Now you can experience the same ultimate in handling and ride quality. These mono tube remote reservoir shocks are completely adjustable to match your riding style. We will custom set the sag to your individual weight with the adjustable preload then fine tune the response with adjustable compression and rebound damping for you and your riding style whether with a passenger and luggage or without. The Screamin’ Eagle/ Öhlins inverted fork design provides improved front wheel stiffness and reduced steering inertia. Micro-polished inner tubes reduce friction for performance as does the gold titanium nitride coating on the fork sliders. 30 mm pistons and NIX technology are used to maintain optimal damping at higher frequency to improve control, the rider notices this through a better feel for tire contact.

Brembo GP4RX brake calipers

The body of this caliper is made entirely from billet and consists of two mechanically connected pieces. Particular attention was dedicated to finding high braking power and stiffness values, obtained thanks to painstaking design, the use of carefully selected raw materials and ultra modern metal machining technology discoveries.The hydraulics were the focus of a careful fine-tuning. The use of four 32 mm diameter pistons allowed a further increase in braking power and modularity. This model implements a surface finish borrowed from MotoGP. The nickel plating, in addition to giving it a decidedly attractive look, allowed the already strict machining tolerances to be refined, all to the advantage of performance and operating precision. The brake pads slide in specific guides, machined onto the body of the calliper itself, which allow brake pad pins to be eliminated. The Brembo logo is embossed and hand painted in classic Brembo Red. The product, provided in a kit, includes sintered brake pads which represent the absolute best quality available on the market today.

Screaming Eagle King 6 Transmission

Born from racing, the Screamin' Eagle® Racing - King 6 is a battle-tested performance transmission developed by the Harley-Davidson Factory Race Team competing in the Mission King of the Baggers series. Engineered for enhanced gear engagement and durability. Key features include modified back-cut angles on the shift dogs to improve gear engagement and super premium heat treat and shot peening on gears and shafts ensure race-tough strength and durability. You’ll enjoy the smooth shifting performance and know this transmission is built for extreme performance in mind.

Carbon Fibre

Custom gloss finished fender, seat cowl, dash trim and exhaust tips, the exhaust also have the baffles removed. We have found these to be amongst the most popular options, however we can, as a bespoke commission, go further (much further!) Titanium exhausts. Carbon fiber bodywork. Billet aluminum components. These are the materials of aerospace, fighter jets, and F1 cars, now on a performance bagger. Lighter, stronger, faster. No compromises. No limits. A consultation is required and build slots strictly limited.

Screaming Eagle 121 to 135 Engine Conversion

For the rider demanding no-compromise performance. With the largest displacement and the most power of any Harley-Davidson® Stage Kit, this 121ci to 135ci Stage IV Kit was engineered by the pros at Harley-Davidson to deliver instant arm-stretching torque through the entire rpm range. Made for riders seeking maximum displacement, compression, and flow, we’ve seen it deliver 158 horsepower and 160 ft-lb of torque to the rear wheel! This Stage IV Kit features the finest Screamin’ Eagle® components. Many of these new components were informed by extensive testing by the Harley-Davidson Factory Racing Team for the King of the Baggers racing series. The Stage IV kit consists of: All-new Screamin Eagle® Extreme CNC-ported cylinder heads, 68mm throttle body and new cast 68mm intake manifold, new SE8- 550 high-lift cam and 6.8 g/sec fuel injectors.

Testimonials:

I’ve been out for another blast on the CVO, and I'm still absolutely loving it. Took it to ride with a group that is mainly sport bike focused, but they all loved it, and I was smashing R1Ms and other bikes too, so it's an absolute weapon. Big smile on my face.

Riding with the sport bikes today, everyone was trying to cling on for dear life as we were doing some pretty impressive speeds, whereas I was just cruising. I think the combination of the suspension and the swing arm makes for just the best ride ever. Based on my experience of the Harley-Davidson Company and their dealerships I’ve purchased from and dealt with over the years, I would describe the team at Warr’s and the service they offer as exceptional. They are the only team I will rely on 100% and trust to deliver and maintain my bikes. Experienced, knowledgeable and always going the extra mile to meet my needs. What more could I ask for. Customising your Harley-Davidson is really a pleasure as the team guide through ideas on paint design ideas and parts. I’ve just customised a new Road Glide ST and the final result is beyond my expectations from my own original designs and thoughts.

Admin Login Privacy & cookies

F H Warr & Sons Ltd is an Appointed Representative of Automotive Compliance Ltd who is authorised and regulated by the Financial Conduct Authority (FCA No. 497010). Automotive Compliance Ltd’s permissions as a Principal Firm allows F H Warr & Sons Ltd to act as a credit broker, not a lender, for the introduction to Black Horse Financial Services and to act as an agent on behalf of the insurer for insurance distribution activities only.

We are a credit broker and not a lender. We act on behalf of the lender for this introduction and not as your agent. We are not impartial, and we are not an independent financial advisor.

Our approach is to introduce you to Black Horse Financial Services , who are usually able to offer the best available package for you, taking into account both interest rates and other contributions. Our aim is to secure a suitable finance agreement for you that enables you to achieve your financial objectives. If you purchase a vehicle, in the majority of cases, we will receive a commission from Black Horse Financial Services for introducing you to them which is either a fixed fee, or a fixed percentage of the amount that you borrow. This may be linked to the vehicle model you purchase.

Black Horse Financial Services also provide preferential rates to us for the funding of our vehicle stock and also provide financial support for our training and marketing. But any such amounts they pay us will not affect the amounts you pay under your finance agreement; however, you will be contributing towards the commission paid to us with the interest collected on your repayments. Before we propose your application, we will inform you of the likely amount of commission we will receive and seek your consent to receive this commission. The exact amount of commission that we will receive will be confirmed prior to you signing your finance agreement.

All finance applications are subject to status, terms and conditions apply, UK residents only, 18s or over. Guarantees may be required.

Complaints where you are operating under Automotive Compliance’s FCA permissions, the following contact details need to be on this page for complaints: Regulated Complaints Post: Automotive Compliance Ltd, The Factory, 44 Alfred Street, Gloucester, GL1 4DD Telephone: 01452671560 E-mail: complaints@automotive-compliance.co.uk

Financial Ombudsman Service, the following information must also be added to this page: If we cannot resolve your complaint within 8 weeks, you may refer your dispute to the Financial Ombudsman Service. This service is free to use. Their consumer helpline is available on 0800 023 4567 or 0300 123 9123 or you can visit their website at www.financial-ombudsman.org.uk

Company Registration Number - 00582482

Firm Reference Number - FRN 831461

VAT Number - 2272594

Find us

Opening Hours

Social Media

Find us

Opening Hours

Mailing List

Social Media